Hospital Project Case Study in Utah

This project information is pulled from our database of hundreds of thousands of construction projects that have been started over the past 5 years. Use it to research ideas and potential partners for your own project. Additional examples of hospital projects in Utah are also available.

Project Overview

Project Title:USH PROVO MEDICAL SERVICES BUILDING
Estimated Value:$729,000 (a more accurate cost estimate is available from RSMeans Online)
The cost to build hospitals in Utah depends upon the location, project scope, specific components used and current market conditions. If you are looking to size the cost of building a project similar to this one, an accurate estimate of the costs to build your particular project is available on RSMeansOnline.com.

Project Location

State:Utah
County:Utah
City:Provo
Address:1300 E Center St

Project Type

Building Category:Hospitals
Work Type:Alteration

Project Description:

This Project Is To Replace The Existing Steam Heating System On Two Floors Of The Medical Services Building With A Hydronic System, Existing Steam Piping Wil Be Abandoned Or Removed And New Hydronic System Will Be Installed To Provide Heat For The Spaces On The Second & Third Floors Of The Building, A New Steam T Hot Water Converter Will Be Provided Along With New Pumps, Valves, Piping, & Controls, Existing Cabinet Heaters On The Second & Third Floors Will Be Replace With New Units, The New Units Will Be Reconnected To The Chilled Water Cooling System, The Third Floor Is Served Primarily By Steam Cabinet Heaters And The Cooling/Ventilation Is Provided From Rooftop Air Handlers, The New System Will Be Adding New Hot Water Coils In The Existing Ductwork & Replacement Of Two Of The Three Air Handlers On The Roof, The Heating Will Be From These New Hot Wate Coils Using The Existing Ductwork To Distribute The Heated Air To The Spaces, The Existing Fan Coil Units Will Be Abandoned In Place Unless Noted Otherwise, Additional Heat Pump Units Are Also To Be Installed For Additional Heating/Cooling Capacity In The Pharmacy Area Of The Third Floor

Project Owner

DIVISION OF FACILITIES CONST MANAGEMENT

Project Design & Engineering

Electrical Engineer: Van Boerum & Frank Associates

MasterFormat® Divisions Included in Project Scope

The following product types are included in the plans for this project. Click on any link to get product information from our SmartBuilding Index directory of commercial building products -- including product sourcing, manufacturer catalogs, formatted specs, CAD details and BIM objects.

  • Air Outlets and Inlets
  • Air to Air Energy Recovery Equipment
  • Boiler Feedwater Pumps
  • Cast Iron Boilers
  • Commissioning of HVAC
  • Condensing Boilers
  • Deaerators
  • Diffusers Registers and Grilles
  • Fuel Fired Duct Heaters
  • Fuel Fired Heaters
  • Fuel Fired Unit Heaters
  • Gas Fired Radiant Heaters
  • Heat Pipe Air to Air Energy Recovery Equipment
  • Heat Wheel Air to Air Energy Recovery Equipment
  • Heating Boiler Feedwater Equipment
  • Heating Boilers
  • HVAC Gravity Ventilators
  • Low Voltage Electrical Transmission
  • Pulse Combustion Boilers
  • Radiant Heating Units
  • Sound Vibration and Seismic Control
  • Testing Adjusting and Balancing for HVAC
  • Thermal Storage
  • Water Tube Boilers