SPRAYSMART SPRAY ADHESIVES
Azrock SpraySmart adhesives adhere to porous and non-porous concrete, wood, metal and existing vinyl composition tile surfaces. Spray application is fast – installation time can be reduced by 70%. SpraySmart adhesives require no pre-mixing, and are water-based, non-staining and non-toxic. They create an immediate bond, setting in 0 – 20 minutes, which allows traffic to be accommodated instantly. Provided in recyclable 28 lb commercial cylinders and 22 oz bottles, adhesives will cover areas of 100 ft² – 5000 ft² depending on application and formulation. SpraySmart adhesives are FloorScore certified low emitting products.

TROWEL-TYPE ADHESIVES
Azrock trowel-type adhesives adhere easily to terrazzo, ceramic, marble, polymeric poured floors, suspended plywood, existing single-layer vinyl composition tile, vinyl asbestos, all grades of concrete, and asphalt tile when it is firmly adhered to approved subfloors. Azrock trowel adhesives have little odor and resist moisture, alkali and plasticizer migration. Fast drying, Azrock trowel adhesives allow traffic after only 48 hours and are ready for initial maintenance after 5 days. They are packaged in 1-gallon pails (4/case) and 4-gallon pails, and are available in 2 types:

100 CLEAR THIN SPREAD ADHESIVE:

• SBR latex emulsion/dry set type
• Cream color when applied; dries clear
• Covers 350 ft²/gal (30 m²/3.78 L)
• Dry time 15 – 60 minutes

800 PRESSURE SENSITIVE ADHESIVE:

• Acrylic latex emulsion/dry set type
• Off-white color
• Covers 300 ft²/gal (25 m²/3.78 L)
• Dry time 45 – 60 minutes

Features, Advantages

• Zero VOCs
• CRI Green Label Plus certified as low emitting products
• May contribute points toward LEED® project certification