Sump Pumps - 22 14 29
Sump Pumps are mounted in a sump and are used to prevent run-off and drainage water from causing flooding. They may be completely submersible or designed so that the motor is mounted at the top of the sump with a long shaft connecting the pump at the bottom of the sump.
Sump pumps are used in basements, elevator pits and other low lying areas where storm and run-off water collects.
Sump Pumps Industry Associations:
Sump Pumps Projects Up for Bid:
- ATHOL SENIOR CENTER-GEN (Bids Due 2009-12-16)
- MNDOT CARVER CO CHASKA TRUCK STATION (Bids Due 2009-12-15)
- COYOTE CREEK ELEMENTARY SCHOOL (Bids Due 2009-12-15)
- FORAN HIGH SCHOOL (Bids Due 2009-12-15)
- LEA COUNTY LAW ENFORCEMENT BUILDING (Bids Due 2009-12-10)
Tips on Estimating Sump Pump Costs from RSMeans
 | Most pipe is priced first as straight pipe with a joint (coupling, weld, etc.) every 10 feet and a hanger usually every 10 feet. There are exceptions with hanger spacing such as for cast iron pipe (5 feet), and plastic pipe (3 per 10 feet). When preparing an estimate, it may be necessary approximate the fittings. Fittings usually run between 25% and 50% of teh cost of the pipe. The lower percentage is for simple runs, and the higher number is for complex areas, such as mechanical rooms. |
